On this Frigidaire washer platform, E35 is recorded as Pressure sensor indicates an overfill condition. Keep the complete model number with the code before treating it as a parts decision.
Written by
Daniel Reyes Appliance SpecialistPublished September 11, 2026
Content status:
Verified
Error codeE35
ApplianceWasher
Affected model seriesAffinity/front-load/general-family or laundry-center platform
Quick answer
E35 — Pressure sensor indicates an overfill condition
Model compatibility: Frigidaire reuses codes across series and model years, so E35 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
E35 is a control-reported condition, not an automatic proof that one component has failed. Wiring, sensors, airflow, water, mechanical restrictions and the control itself can produce similar displays.
Pressure sensor indicates an overfill condition. Platform note: Affinity/front-load/general-family or laundry-center platform. Confirm the exact model family before applying a service procedure from another Frigidaire generation.
Signs
Symptoms you may notice
The appliance may show this behavior: code returns after a restart or at the same point in a cycle.
The appliance may show this behavior: appliance may pause, fail to begin the wash phase, or remain at a low water level.
The appliance may show this behavior: affected function may be disabled while other functions still operate.
The appliance may show this behavior: appliance may enter a protective state to prevent additional damage.
Why it happens
Possible causes
Diagnosis may need to consider closed or restricted water supply — that possibility is not a confirmed failed part.
Diagnosis may need to consider kinked or blocked inlet hoses — that possibility is not a confirmed failed part.
Diagnosis may need to consider clogged inlet screens — that possibility is not a confirmed failed part.
Diagnosis may need to consider failed inlet valve — that possibility is not a confirmed failed part.
Diagnosis may need to consider pressure-sensing or control issue — that possibility is not a confirmed failed part.
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Confirm the hot and cold supply faucets are fully open. Stay within normal owner access and stop if a safety warning appears.
Straighten any visibly kinked inlet hose. Stay within normal owner access and stop if a safety warning appears.
If the user manual permits it, inspect and clean the hose inlet screens. Stay within normal owner access and stop if a safety warning appears.
Check for an obvious external leak and restart the cycle once. Stay within normal owner access and stop if a safety warning appears.
Do not bypass door or lid locks, open sealed refrigeration systems, service microwave high-voltage sections, or dismantle internal gas or induction power modules.
Important safety warning. Stop using the appliance for smoke, arcing, a burning-electrical smell, repeated breaker trips, uncontrolled heating, or water reaching electrical parts.
Get help
When to call a technician
If E35 returns after the safe external checks, or the appliance shows a safety warning, professional diagnosis is appropriate. A technician should confirm the Frigidaire model and test the implicated system rather than replacing a part from the code description alone.
Seeing this code on your Frigidaire appliance?
Book a specialist visit for a clear estimate and approval before any repair.
Pressure sensor indicates an overfill condition That technical note still has to be confirmed against the exact model and control generation.
Record the code first. One controlled reset can be reasonable when there is no safety warning. Repeated resets are not a repair.
No. The code can point to a system while the failed item is wiring, a restriction, a sensor, or another connected component.
References
Sources & references
**Frigidaire Service Tech Handbook — Electrolux Home Products** — manufacturer service handbook mirror https://manualzilla.com/doc/6030612/frigidaire-service-tech-handbook---atech-appliance-repair... This page paraphrases diagnostic information rather than reproducing service-manual text. Model-specific documentation takes precedence if it conflicts with a general guide.
Ready to get your Frigidaire appliance working again?
Book a repair online or call us — clear estimates and approval before any repair work begins.
