On this Frigidaire range & wall oven platform, F010 is recorded as Oven temperature runaway. Keep the complete model number with the code before treating it as a parts decision.
Written by
Daniel Reyes Appliance SpecialistPublished September 11, 2026
Content status:
Verified
Error codeF010
ApplianceRange & Wall Oven
Affected model seriesES502I / current electronic platform
Quick answer
F010 — Oven temperature runaway
Model compatibility: Frigidaire reuses codes across series and model years, so F010 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
F010 is a control-reported condition, not an automatic proof that one component has failed. Wiring, sensors, airflow, water, mechanical restrictions and the control itself can produce similar displays.
Oven temperature runaway. Platform note: ES502I / current electronic platform. Confirm the exact model family before applying a service procedure from another Frigidaire generation.
Signs
Symptoms you may notice
The appliance may show this behavior: code returns after a restart or at the same point in a cycle.
The appliance may show this behavior: heating/cooling performance may be reduced or disabled, or the appliance may stop to protect itself from unsafe temperature.
The appliance may show this behavior: affected function may be disabled while other functions still operate.
The appliance may show this behavior: appliance may enter a protective state to prevent additional damage.
Why it happens
Possible causes
Diagnosis may need to consider restricted airflow or abnormal heat buildup — that possibility is not a confirmed failed part.
Diagnosis may need to consider failed temperature sensor or probe — that possibility is not a confirmed failed part.
Diagnosis may need to consider heater/relay problem — that possibility is not a confirmed failed part.
Diagnosis may need to consider thermal limiter or protective device opening — that possibility is not a confirmed failed part.
Diagnosis may need to consider control-board issue — that possibility is not a confirmed failed part.
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Turn the appliance off and allow it to cool completely. Stay within normal owner access and stop if a safety warning appears.
Check user-accessible airflow paths, filters, and vents for blockage. Stay within normal owner access and stop if a safety warning appears.
For cooking appliances, verify cookware/rack/accessory placement against the owner manual. Stay within normal owner access and stop if a safety warning appears.
Do not bypass thermal cutouts, high-limit devices, or temperature sensors. Stay within normal owner access and stop if a safety warning appears.
Do not bypass door or lid locks, open sealed refrigeration systems, service microwave high-voltage sections, or dismantle internal gas or induction power modules.
Important safety warning. Stop using the appliance for smoke, arcing, a burning-electrical smell, repeated breaker trips, uncontrolled heating, or water reaching electrical parts. For persistent gas odor, leave the area and follow local gas-emergency guidance. Do not dismantle internal gas or induction power modules.
Get help
When to call a technician
If F010 returns after the safe external checks, or the appliance shows a safety warning, professional diagnosis is appropriate. A technician should confirm the Frigidaire model and test the implicated system rather than replacing a part from the code description alone.
Seeing this code on your Frigidaire appliance?
Book a specialist visit for a clear estimate and approval before any repair.
Oven temperature runaway That technical note still has to be confirmed against the exact model and control generation.
Record the code first. One controlled reset can be reasonable when there is no safety warning. Repeated resets are not a repair.
No. The code can point to a system while the failed item is wiring, a restriction, a sensor, or another connected component.
References
Sources & references
**Frigidaire ES 502I Electronic Oven Controls and Induction Smoothtop Service Data Sheet** — manufacturer service data sheet mirror https://manuals.plus/m/d2757f8f4560ab2d536f514772abe18efc24877f2cb2b72c40e727181c06c2a9 This page paraphrases diagnostic information rather than reproducing service-manual text. Model-specific documentation takes precedence if it conflicts with a general guide.
Ready to get your Frigidaire appliance working again?
Book a repair online or call us — clear estimates and approval before any repair work begins.
