On this Frigidaire microwave platform, F5 is recorded as Shorted humidity sensor. Keep the complete model number with the code before treating it as a parts decision.
Written by
Daniel Reyes Appliance SpecialistPublished September 11, 2026
Content status:
Verified
Error codeF5
ApplianceMicrowave
Affected model seriesLegacy OTR/convection microwave platform
Quick answer
F5 — Shorted humidity sensor
Model compatibility: Frigidaire reuses codes across series and model years, so F5 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
F5 is a control-reported condition, not an automatic proof that one component has failed. Wiring, sensors, airflow, water, mechanical restrictions and the control itself can produce similar displays.
Shorted humidity sensor. Platform note: Legacy OTR/convection microwave platform. Confirm the exact model family before applying a service procedure from another Frigidaire generation.
Signs
Symptoms you may notice
The appliance may show this behavior: code returns after a restart or at the same point in a cycle.
The appliance may show this behavior: appliance may stop a cycle, regulate temperature incorrectly, or substitute a protective operating mode.
The appliance may show this behavior: affected function may be disabled while other functions still operate.
The appliance may show this behavior: appliance may enter a protective state to prevent additional damage.
Why it happens
Possible causes
Diagnosis may need to consider disconnected sensor harness — that possibility is not a confirmed failed part.
Diagnosis may need to consider open or shorted sensor — that possibility is not a confirmed failed part.
Diagnosis may need to consider moisture/corrosion at a connector — that possibility is not a confirmed failed part.
Diagnosis may need to consider failed sensor — that possibility is not a confirmed failed part.
Diagnosis may need to consider control-board input issue — that possibility is not a confirmed failed part.
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Power the appliance off for about 30–60 seconds and restart it. Stay within normal owner access and stop if a safety warning appears.
Check for obvious external conditions that could create an abnormal temperature reading. Stay within normal owner access and stop if a safety warning appears.
Do not open panels or bypass a sensor. Stay within normal owner access and stop if a safety warning appears.
Verify the model number before using a sensor-resistance specification. Stay within normal owner access and stop if a safety warning appears.
Do not bypass door or lid locks, open sealed refrigeration systems, service microwave high-voltage sections, or dismantle internal gas or induction power modules.
Important safety warning. Stop using the appliance for smoke, arcing, a burning-electrical smell, repeated breaker trips, uncontrolled heating, or water reaching electrical parts. Do not open microwave high-voltage sections.
Get help
When to call a technician
If F5 returns after the safe external checks, or the appliance shows a safety warning, professional diagnosis is appropriate. A technician should confirm the Frigidaire model and test the implicated system rather than replacing a part from the code description alone.
Seeing this code on your Frigidaire appliance?
Book a specialist visit for a clear estimate and approval before any repair.
Shorted humidity sensor That technical note still has to be confirmed against the exact model and control generation.
Record the code first. One controlled reset can be reasonable when there is no safety warning. Repeated resets are not a repair.
No. The code can point to a system while the failed item is wiring, a restriction, a sensor, or another connected component.
References
Sources & references
**Frigidaire OTR Microwave Technical Data Sheet — F1–F5** — manufacturer technical data mirror https://www.manualslib.com/manual/461665/Frigidaire-Oven.html This page paraphrases diagnostic information rather than reproducing service-manual text. Model-specific documentation takes precedence if it conflicts with a general guide.
Ready to get your Frigidaire appliance working again?
Book a repair online or call us — clear estimates and approval before any repair work begins.
